+359 879 201 665
Home »Airsoft »Airsoft Parts »AIRSOFT ASCU 2 / LITE
AIRSOFT ASCU 2 / LITE
Buy -BGN106.90
In stock:
Airsoft center
Manufacturer:Product #:
Description
Преди употреба прочетете упътването.
Силно препоръчваме ASCU да бъде инсталирано от Airsoft техник с опит и знания по темата.

Електроника от Българската фирма Airsoft Systems. Предназначена за Airsoft гиърбокс версия 2. По-лесна и бърза инсталация, съставена от една част ( платка ), вече не се монтира кът оф левър, защото същият такъв е интегриран към платката. Оставя се сейфти левъра на гиърбокса, като се заменя само вътрешното рамо на левъра с такъв, който е в комплекта на ASCU 2 / Lite ( механичен предпазител ). Единствената функция, което е премахната спрямо старата предишната версия е, че няма опция за промяна на позициите на селектора за Full Auto, Burst и т.н.
Лесно и бързо. Поставяте и играете.

Ако желаете да се свържете с Airsoft техник за допълнителни въпроси по темата, моля кликнете ТУК!
+ See more
Products from same category
AIRSOFT ASCU 2 / GEN 5 ASG
Before using, read the manual. It is highly recommended that the ASCU be installed by an Airsoft technician with experience and knowledge on the subject. 
ASCU is an electrical module that dramatically improves the cycle of the gearbox (the mechanics of the replica). ASCU monitors the work of your Gearbox at all times - no matter how you pull the trigger, the replica will function in the same way. ASCU also have low battery protection. If the battery starts to drain, the electronics will give you a signal and stop the power supply. You can use Li-Po batteries from 7.4 to 12V, as well as NiMh and NiCd batteries. It is strongly recommended to use 11.1 or 12 V Li-Po batteries. If you want to use 7.4 Li-Po or 8.4 NiMh make sure that you install M90 or M100 spring. The ASCU will also stop the power supply in case of a problem in the gearbox. This way you will save the replica. No modifications or alterations to the gearbox are required to install the electronics. In a small number of cases, the gearbox may need to shed some small details so you can put the electronics safely. ASCU electronics work perfectly with quality motors like those from Ultimate line. In the kit you will find two-piece ASCU, cables and connector (cables and connectors are already installed in the electronics), a selector plate, a cut off lever and spring for the cut off and guide. In some cases, you have to use the factory selector plate which you have on the replica. ASCU Gen 5 can be reprogramming in different shooting modes. If you want to learn how to do this, read the instruction manual.


If you would like to contact an Airsoft technician for further questions on the subject, please click
HERE.
BGN119.90
AIRSOFT ASCU 3 / GEN 5 ASG
Before using, read the manual. It is highly recommended that the ASCU be installed by an Airsoft technician with experience and knowledge on the subject. 
ASCU is an electrical module that dramatically improves the cycle of the gearbox (the mechanics of the replica). ASCU monitors the work of your Gearbox at all times - no matter how you pull the trigger, the replica will function in the same way. ASCU also have low battery protection. If the battery starts to drain, the electronics will give you a signal and stop the power supply. You can use Li-Po batteries from 7.4 to 12V, as well as NiMh and NiCd batteries. It is strongly recommended to use 11.1 or 12 V Li-Po batteries. If you want to use 7.4 Li-Po or 8.4 NiMh make sure that you install M90 or M100 spring. The ASCU will also stop the power supply in case of a problem in the gearbox. This way you will save the replica. No modifications or alterations to the gearbox are required to install the electronics. In a small number of cases, the gearbox may need to shed some small details so you can put the electronics safely. ASCU electronics work perfectly with quality motors like those from Ultimate line. In the kit you will find two-piece ASCU, cables and connector (cables and connectors are already installed in the electronics), a selector plate, a cut off lever and spring for the cut off and guide. In some cases, you have to use the factory selector plate which you have on the replica. ASCU Gen 5 can be reprogramming in different shooting modes. If you want to learn how to do this, read the instruction manual.


If you would like to contact an Airsoft technician for further questions on the subject, please click
HERE.
BGN119.90