Showing: 1 to 12 of 12 Products
Order By:   Price   |   Name   |   Latest
1512078
Gear sector clips are used to prevent “empty shooting” and is primarily used with high-speed tunings (25+ rounds/sec.). The gear sector clip is mounted on the sector gear and delays the tappet plate (and thereby the nozzle) in its releasing time during the rotation.
4.90 BGN
(4.08 ex. TAX)
1512079
Gear sector clips are used to prevent “empty shooting” and is primarily used with high-speed tunings (25+ rounds/sec.). The gear sector clip is mounted on the sector gear and delays the tappet plate (and thereby the nozzle) in its releasing time during the rotation.
5.90 BGN
(4.92 ex. TAX)
1512033
Precision steel shims, essential for a smooth running gearbox, not only will well shimmed gears effect the sound of a gearbox but more importantly the power transfer between gears and as a result the durability of gears and piston. Contains: 10 pcs 0,15 mm 10 pcs 0,30 mm
6.90 BGN
(5.75 ex. TAX)
1512034
Precision steel shims, essential for a smooth running gearbox, not only will well shimmed gears effect the sound of a gearbox but more importantly the power transfer between gears and as a result the durability of gears and piston. Contains: 10 pcs 0,1 mm 10 pcs 0,2 mm
6.90 BGN
(5.75 ex. TAX)
1606002
The ULTIMATE® Upgrade Series gear grease a necessary component of any serious upgrade. All moving parts must be kept well lubricated to avoid heat built up and excessive wear on gears. Contains approx. 2.5 ml Features: Teflon grease is anti-wear and extreme pressure resistance. Recommended to use on metal parts. Low tacky and high cohesion suitable for high-speed gear and bearing rotation . Temperature range from -40°C~+287°C. For in-depth information on ULTIMATE® Upgrade Series, see catalogue.
11.90 BGN
(9.92 ex. TAX)
1512137
The second generation of steel ball bearings are designed to deliver on accuracy, high rotational speed and high rigidity needed for the demanding conditions in a modern upgraded AEG. The 8mm steel ball bearings gen.2 have been optimized after working closely with bearing specialists. Optimized by reducing the free angle, a better steel alloy and better surface the second generation minimizes failure in your AEG. New features: Curvature in the bearing track has been optimized in order accept the continuous shock impacts from the piston in an AEG. Free angle has been minimized since no angular movement is experienced in an AEG gearbox. 7 balls has been chosen which offers less centrifugal force from each ball compared to the bigger 6 ball version = less heat and track wear in high speed conditions. Surface of the track has been optimized to minimize ball skid and heat buildup. Steel type has been optimized. We have optimized the balance between corrosion resistance and strength.
17.90 BGN
(14.92 ex. TAX)
1512186
Our new 8 mm steel bushing with graphite is the ultimate in durability when it comes to AEG bearings. You do not get the extreme low frictions as with the ball bearings, but instead eliminate the risk of bearing break downs. Our steel bushings are made out of porous sintered steel combined with graphite. This type of porous metal can absorb the oil/grease and greatly reduce the need for maintenance and lubrication. Unlike stainless steel or other solid metal bearings, the risk of surface grinding or burning on the gear axles has also been greatly reduced, thus minimizing damage to the expensive gears compared to the bushings. The dimensions has been optimized in order to easily fit into almost any 8mm gearbox without being too loose or damaging the holes when installing. Any upgrade combination can be used with these bushings – no speed or power limitations So if your main priority is durability, strength and easy maintenance this is the bearing you want in your AEG. Features Porous sintered steel combined with graphite Optimized dimensions Compatible with any upgrade combination
19.90 BGN
(16.58 ex. TAX)
1512088
The ULTIMATE® 7mm ball bearings are perfectly suited for upgrading all compatible gear boxes. Nylon bushings are not built to withstand the increased stress from an upgrade, so it is a must, that these are replaced with metal bushings or ball bearings when upgrading. Set of 6 pcs.
37.90 BGN
(31.58 ex. TAX)
1512065
ULTIMATE® Upgrade Series gear set with high speed gear ratio of 16:1 for 100-130 m/s springs Material of the highest quality increases gear durability with as much as 35%. The design and construction of each gear is engineered to highest performance.
92.90 BGN
(77.42 ex. TAX)
1512064
ULTIMATE® Upgrade Series gear set with original gear ratio of 19:1 for 90-130 m/s springs Material of the highest quality increases gear durability with as much as 35%. The design and construction of each gear is engineered to highest performance.
102.90 BGN
(85.75 ex. TAX)
1512077
ULTIMATE® Upgrade Series gear set with ultra torque up gear ratio of 26:1 for 110-170 m/s springs A low gear-ratio gives a lower rate of fire and helps to reduce stress on the motor, and produces less impact-energy on first-contact with the piston, prolonging life of both. Engineered for highest performance. Smoother and quieter operation. Reduced stress on the motor. Less impact energy on piston. Materials of the highest quality. The teeth on helical gears are cut at an angle to the face of the gear. When two teeth on a helical gear system engage, the contact starts at one end of the tooth and gradually spreads as the gears rotate, until the two teeth are in full engagement. This gradual engagement makes helical gears operate much more smoothly and quietly than spur gears. Most be used with appropriate ULTIMATE® upgraded internal components to secure the best performance and durability.
129.90 BGN
(108.25 ex. TAX)
167.90 BGN
(139.92 ex. TAX)
Show: products per page
1
The question was sent.